PWS-OPTIMA PLUS Mini

Fastener PWS-OPTIMA PLUS Mini (one upper one-piece and two lower clamping plates) is a universal fastener of wide application for the repair of transverse, as well as longitudinal / diagonal tears and cuts. This fastener is available with a distance between the bolt axes of 44 mm.

Contact

Characteristics

  • PWS-OPTIMA PLUS Mini - PWS
    Thickness of the tape
    > 10 mm
  • PWS-OPTIMA PLUS Mini - PWS
    Tension
    > 500kN/m
  • PWS-OPTIMA PLUS Mini - PWS
    Any size
    > 50 cm
  • PWS-OPTIMA PLUS Mini - PWS
    Damage type
    docking
    and repair

Completeness

  • Upper plate
    50 pcs
  • Bottom plate
    100 pcs
  • Screw
    100 pcs
  • Bit
    1 pcs

Information

Significantly increases the quality of repairs during hot and cold vulcanization (strengthens the edges of the joint and prevents possible delamination of the belt). In emergency cases, it is possible to repair a rubber cord tape with a combination of two fasteners PWS-OPTIMA PLUS or PWS-OPTIMA PLUS Mini. The best solution for reinforcing belt ends when hot vulcanizing conveyor belts. Due to its design and technical solutions with this type of fasteners , it is possible to repair transverse tears of the conveyor belt not only joint to joint, but also by the overlapping method, which significantly increases the strength of the butt joint.